Cleaning jewelry: methods and tips for at home

For stainless steel jewelry you can also use a mild soap solution. You can also make a mixture of equal parts water and vinegar and soak the jewelry in it. After a few minutes, you can remove the jewelry from the solution, rinse thoroughly and dry with a soft cloth.

However, please note that some gold-plated jewelry pieces are more delicate than others and certain cleaning methods can damage the jewelry. Therefore, always try to clean the jewelry carefully by hand instead of letting it soak in a solution for a long time.

Clean titanium jewelry

Titanium is a durable and robust material. It is very popular for making jewelry, but even this precious metal can tarnish over time and lose its shine. The good news, however, is that you can make your dirty or tarnished titanium jewelry shine again with a few simple methods. 

Even if your titanium jewelry is very dirty, you should under no circumstances use an aggressive cleaner or hard brushes. This could attack the material and leave unsightly marks and scratches. 

If heavily soiled you should consider cleaning in an ultrasonic bath. If you don't have one at home, you can also have your titanium jewelry cleaned at a jeweler. Cleaning in an ultrasonic bath is particularly gentle and can also remove dirt from deep cracks.

Clean titanium jewelry with detergent:

One of the most popular home remedies for cleaning your titanium jewelry is dishwashing liquid. Cleaning titanium jewelry with dish soap is a simple and cost-effective way to remove dirt and debris from your jewelry. All you need is 

• warm water, 
• Dishwashing liquid 
• and a soft cloth.

Step 1: Fill bowl with warm water

First, you should fill a small basin or bowl with warm water.

Step 2: Add detergent

Now add a few drops of dishwashing liquid to the water bath. 

Step 3: Put titanium jewelry in and let it soak

Then place your titanium jewelry in the bowl and let it soak for a few minutes.

Step 4: Clean titanium jewelry with a soft cloth

After the titanium jewelry has soaked, you can carefully clean it with a soft cloth. 

Step 5: Rinse jewelry under warm water

Rinse the jewelry thoroughly under warm water to completely remove the detergent.

Step 6: Dry jewelry thoroughly

Dry your jewelry thoroughly afterwards.

Clean titanium jewelry with baking soda:

If your titanium jewelry is a little more dirty, you can also use baking powder to clean it. However, only use a soft cloth or a soft brush and be very careful as rubbing too hard can cause scratches.

1. To do this, mix baking soda with water. Put 1-2 teaspoons of baking soda in a bowl and slowly add some water until it forms a thick paste.
2. Apply the paste to the titanium jewelry with a soft cloth or brush and gently rub the surface.
3. Then rinse the titanium jewelry thoroughly with warm water until all residues of the baking soda paste are removed and dry your jewelry well.

Alternatively you can also put the baking powder directly onto a soft cloth and rub it gently over the piece of jewelry, until its shine is back.

Clean silver jewelry

Silver jewelry is beautiful, but unfortunately it tends to oxidize and discolor over time. Therefore, silver jewelry requires regular cleaning. There are also some home remedies and tricks that you can use to clean your silver jewelry in the best possible way.

Please note that Silver jewelry with stones is not suitable for every method. Gemstones are often very sensitive and must be handled very carefully.

However, you can clean silver jewelry without stones in different ways and very easily .

Clean silver jewelry with baking soda:

Not only gold jewelry, but also silver jewelry can be cleaned with baking soda. You can do this in the same way as with gold jewelry. 

1. Make a paste out of baking soda and water,
2. which you polish onto your silver jewelry with a soft cloth. 
3. Then rinse the jewelry under warm water
4. and then dry it completely.

Clean silver jewelry with toothpaste:

Take a pea-sized amount of toothpaste and apply it to the silver jewelry. Use a soft cloth or a soft toothbrush to gently work the toothpaste into the jewelry. 

Rinse the jewelry thoroughly with water and dry it with a soft cloth. If the jewelry is very dirty, you can repeat the process.

Clean silver jewelry with aluminum foil:

To clean silver jewelry with aluminum foil, all you need is 

• a bowl, 
• a piece of aluminum foil,
• hot water 
• and some salt.

First place a layer of aluminum foil in the bowl. Then place the silver jewelry on the foil and cover it with another layer of aluminum foil. Now add hot water to the bowl so that the jewelry is completely covered.

Next, add two tablespoons of salt to the water and let the piece of jewelry soak in the solution for 5-10 minutes. During soaking, the aluminum oxide on the foil is broken down into ions that react with the sulfur in the silver, reversing the oxidation of the silver.

After the piece of jewelry has soaked, take it out of the solution and rinse it thoroughly with water. Then dry the jewelry carefully with a soft cloth.

Clean pearl jewelry

Pearl jewelry is a beautiful accessory that can be worn on many occasions. However, pearl jewelry is more delicate than other jewelry and therefore requires special care. Here are some tips that you should keep in mind when handling pearls:

• Avoid contact with chemicals: Pearl jewelry should be protected from contact with chemicals such as perfume, hairspray or cleaning products. These chemicals can damage the surface of the pearls and dull their luster.
   
• Clean the jewelry with a soft cloth: Use a soft, lint-free cloth to clean the pearl jewelry. Dip the cloth in a mild soap solution and wring it well. Clean the jewelry carefully with the cloth and avoid rubbing or scratching vigorously.
   
• Dry the jewelry thoroughly: After you have cleaned the pearl jewelry, you should dry it thoroughly. Use a soft, lint-free cloth and gently pat the beads dry. Make sure the jewelry is completely dry before putting it back on.
   
• Use a gentle, pH-neutral baby soap: Soak a soft cloth in soapy water and gently rub the pearl jewelry with it. Make sure the pearl sits securely in its setting. To care for pearl jewelry, it is also recommended to polish it regularly with a soft cloth.

Do you already know our latest pearl jewelry collection?

Clean jewelry with gemstones

Particular care is also required when it comes to jewelry with precious stones. Gemstones are often very sensitive and must be cleaned particularly gently. Roughly speaking, a distinction is made between hard and soft gemstones.

Hard Gems:

For cleaning jewelry with gemstones such as 

• Diamonds, 
• Sapphires,
• Cubic zirconia
• and rubies, which have a higher degree of hardness, you can use a solution of warm water and mild dish soap. 

Soak the jewelry for a few minutes and then gently brush it with a soft brush. Rinse the jewelry thoroughly with clean water and dry it with a soft cloth.

Soft Gems:

Jewelry with soft gemstones like 

• Opals,
• Turquoise
•  and pearls require special care when cleaning. 

It is best to avoid cleaning products such as dish soap and chemical solutions. 

Instead, use a soft cloth dipped in lukewarm water to gently wipe the jewelry. Dry the jewelry immediately to prevent moisture from penetrating the gemstones. 

If you are unsure about the best way to clean your jewelry, it is best to ask a jewelry care professional for advice.

What mistakes should I avoid when cleaning my jewelry?

When cleaning jewelry there are some mistakes that you should avoid in order to avoid damage to your piece of jewelry to avoid. Here are some of the most common errors:

1. Using harsh cleaning agents:
   Harsh cleaning agents can damage the material of your jewelry and even affect the shine of gemstones or pearls. Instead, use mild cleaners that are specifically formulated for cleaning jewelry.
    
2. Rubbing too hard: 
   When cleaning jewelry, be careful not to rub or scrub too hard. This can damage the surface of the jewelry or even leave scratches.
    
3. Cleaning Damaged Jewelry: 
   If your jewelry is damaged, you should not clean it until you have repaired it. Cleaning can make the problem worse and cause more damage.
    
4. Using water that is too hot: 
   Never use water that is too hot to clean your jewelry, as this may cause the material to become deformed or damaged.
    
5. Cleaning delicate materials with water:
   Some pieces of jewelry may be sensitive to water, such as:b certain materials such as real silver or copper jewelry. 
    
6. Not rinsing thoroughly enough:
   It is important to rinse the jewelry thoroughly with water after cleaning to remove any remaining cleaning products or dirt. If residue remains, it can attack the material of the jewelry.
    
7. Using hard brushes or sponges:
   Never use hard brushes or sponges to clean your jewelry as they can damage the material and leave scratches. Instead, use soft cloths or brushes specifically designed for cleaning jewelry.

Conclusion

Jewelry is often an important part of our outfit and can help us express our personal style and enhance the outfit. However, to ensure that our jewelry stays beautiful for a long time, we need to care for it properly and clean it regularly. 

Regular cleaning removes dirt and debris that can build up on the surface and make the jewelry look dull. In addition, regular cleaning extends the durability of the jewelry and reduces the risk of skin irritation.